by Flow Optimizers | Nov 6, 2025 | Engineering, Technical Articles
Guidance Summary All pumping station retrofits and modifications regardless of whether they use similar, smaller, or larger capacity pumps should aim to follow standard design practices to the greatest extent possible. If physical constraints prevent full compliance,...
by Flow Optimizers | Sep 30, 2025 | Technical Articles
Guide to designing a Vortex Breaker Know the Fluid: Identify the fluid’s properties like viscosity, density, and flow rate. This helps determine how the fluid behaves in the pipe. Find the Vortex Spot: Locate where the vortex might form, usually at tank outlets or...
by Flow Optimizers | May 1, 2025 | Technical Articles
At Flow Optimizers, we’re committed to helping engineers and plant operators improve system efficiency, reduce energy waste, and extend equipment life. That’s why we’re proud to highlight this valuable article from the Hydraulic Institute, of which we’re a proud...
by Flow Optimizers | Nov 4, 2024 | Engineering, Technical Articles, Updates
In fluid systems, vortices can have significant impacts on performance and longevity. Here’s an expanded breakdown: Vortex Formation Vortices form when fluid moves in a rotational or swirling pattern, often occurring in pump intakes where high-velocity flows meet....
by Flow Optimizers | May 9, 2023 | Engineering, Flow Conditioning Bellmouths, Technical Articles, Updates
Minor Loss Info (Bellmouth vs Square Edge)
by Flow Optimizers | Nov 25, 2020 | Engineering, Technical Articles
This technical paper investigates how the suction-specific speed (Nss) of impellers influences the vibration performance of pumps. It revisits historical studies and integrates modern impeller design techniques and computational fluid dynamics (CFD) to explore...
