by Flow Optimizers | Nov 6, 2025 | Engineering, Technical Articles
Guidance Summary All pumping station retrofits and modifications regardless of whether they use similar, smaller, or larger capacity pumps should aim to follow standard design practices to the greatest extent possible. If physical constraints prevent full compliance,...
by Flow Optimizers | Oct 29, 2025 | Engineering, Flow Conditioning Spool Assemblies, Flow Optimizer Vaned Elbows and Spools
Grated Spool Vaned Spool Flow optimizers, also known as flow conditioners, are specialized devices designed to address common challenges in water & wastewater piping systems. These systems often feature irregular layouts with bends, elbows, tees, and obstructions...
by Flow Optimizers | Oct 21, 2025 | Engineering
When and why to use physical modeling vs. CFD for accurate hydraulic prediction. Purpose A physical hydraulic model study is essential for identifying unacceptable flow conditions at the pump suction and for optimizing sump and suction piping designs. This is...
by Flow Optimizers | Sep 30, 2025 | Technical Articles
Guide to designing a Vortex Breaker Know the Fluid: Identify the fluid’s properties like viscosity, density, and flow rate. This helps determine how the fluid behaves in the pipe. Find the Vortex Spot: Locate where the vortex might form, usually at tank outlets or...
by Flow Optimizers | May 1, 2025 | Technical Articles
At Flow Optimizers, we’re committed to helping engineers and plant operators improve system efficiency, reduce energy waste, and extend equipment life. That’s why we’re proud to highlight this valuable article from the Hydraulic Institute, of which we’re a proud...
